3.13 Options for Linking
These options come into play when the compiler links object files into an executable output file. They are meaningless if the compiler is not doing a link step.- object-file-name
- A file name that does not end in a special recognized suffix is considered to name an object file or library. (Object files are distinguished from libraries by the linker according to the file contents.) If linking is done, these object files are used as input to the linker.
-c-S-E- If any of these options is used, then the linker is not run, and object file names should not be used as arguments. See Overall Options.
-llibrary-llibrary- Search the library named library when linking. (The second alternative with the library as a separate argument is only for POSIX compliance and is not recommended.)It makes a difference where in the command you write this option; the linker searches and processes libraries and object files in the order they are specified. Thus, `foo.o -lz bar.o' searches library `z' after file foo.o but before bar.o. If bar.o refers to functions in `z', those functions may not be loaded.The linker searches a standard list of directories for the library, which is actually a file named liblibrary.a. The linker then uses this file as if it had been specified precisely by name.The directories searched include several standard system directories plus any that you specify with -L.Normally the files found this way are library files—archive files whose members are object files. The linker handles an archive file by scanning through it for members which define symbols that have so far been referenced but not defined. But if the file that is found is an ordinary object file, it is linked in the usual fashion. The only difference between using an -l option and specifying a file name is that -l surrounds library with `lib' and `.a' and searches several directories.
-lobjc- You need this special case of the -l option in order to link an Objective-C or Objective-C++ program.
-nostartfiles- Do not use the standard system startup files when linking. The standard system libraries are used normally, unless -nostdlib or -nodefaultlibs is used.
-nodefaultlibs- Do not use the standard system libraries when linking. Only the libraries you specify will be passed to the linker, options specifying linkage of the system libraries, such as
-static-libgccor-shared-libgcc, will be ignored. The standard startup files are used normally, unless -nostartfiles is used. The compiler may generate calls tomemcmp,memset,memcpyandmemmove. These entries are usually resolved by entries in libc. These entry points should be supplied through some other mechanism when this option is specified. -nostdlib- Do not use the standard system startup files or libraries when linking. No startup files and only the libraries you specify will be passed to the linker, options specifying linkage of the system libraries, such as
-static-libgccor-shared-libgcc, will be ignored. The compiler may generate calls tomemcmp,memset,memcpyandmemmove. These entries are usually resolved by entries in libc. These entry points should be supplied through some other mechanism when this option is specified. One of the standard libraries bypassed by -nostdlib and -nodefaultlibs is libgcc.a, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. (See Interfacing to GCC Output, for more discussion of libgcc.a.) In most cases, you need libgcc.a even when you want to avoid other standard libraries. In other words, when you specify -nostdlib or -nodefaultlibs you should usually specify -lgcc as well. This ensures that you have no unresolved references to internal GCC library subroutines. (For example, `__main', used to ensure C++ constructors will be called; seecollect2.) -pie- Produce a position independent executable on targets which support it. For predictable results, you must also specify the same set of options that were used to generate code (-fpie, -fPIE, or model suboptions) when you specify this option.
-rdynamic- Pass the flag -export-dynamic to the ELF linker, on targets that support it. This instructs the linker to add all symbols, not only used ones, to the dynamic symbol table. This option is needed for some uses of
dlopenor to allow obtaining backtraces from within a program. -s- Remove all symbol table and relocation information from the executable.
-static- On systems that support dynamic linking, this prevents linking with the shared libraries. On other systems, this option has no effect.
-shared- Produce a shared object which can then be linked with other objects to form an executable. Not all systems support this option. For predictable results, you must also specify the same set of options that were used to generate code (-fpic, -fPIC, or model suboptions) when you specify this option.1
-shared-libgcc-static-libgcc- On systems that provide libgcc as a shared library, these options force the use of either the shared or static version respectively. If no shared version of libgcc was built when the compiler was configured, these options have no effect. There are several situations in which an application should use the shared libgcc instead of the static version. The most common of these is when the application wishes to throw and catch exceptions across different shared libraries. In that case, each of the libraries as well as the application itself should use the shared libgcc. Therefore, the G++ and GCJ drivers automatically add -shared-libgcc whenever you build a shared library or a main executable, because C++ and Java programs typically use exceptions, so this is the right thing to do. If, instead, you use the GCC driver to create shared libraries, you may find that they will not always be linked with the shared libgcc. If GCC finds, at its configuration time, that you have a non-GNU linker or a GNU linker that does not support option --eh-frame-hdr, it will link the shared version of libgcc into shared libraries by default. Otherwise, it will take advantage of the linker and optimize away the linking with the shared version of libgcc, linking with the static version of libgcc by default. This allows exceptions to propagate through such shared libraries, without incurring relocation costs at library load time. However, if a library or main executable is supposed to throw or catch exceptions, you must link it using the G++ or GCJ driver, as appropriate for the languages used in the program, or using the option -shared-libgcc, such that it is linked with the shared libgcc.
-static-libstdc++- When the g++ program is used to link a C++ program, it will normally automatically link against libstdc++. If libstdc++ is available as a shared library, and the -static option is not used, then this will link against the shared version of libstdc++. That is normally fine. However, it is sometimes useful to freeze the version of libstdc++ used by the program without going all the way to a fully static link. The -static-libstdc++ option directs the g++ driver to link libstdc++ statically, without necessarily linking other libraries statically.
-symbolic- Bind references to global symbols when building a shared object. Warn about any unresolved references (unless overridden by the link editor option `-Xlinker -z -Xlinker defs'). Only a few systems support this option.
-Tscript- Use script as the linker script. This option is supported by most systems using the GNU linker. On some targets, such as bare-board targets without an operating system, the -T option may be required when linking to avoid references to undefined symbols.
-Xlinkeroption- Pass option as an option to the linker. You can use this to supply system-specific linker options which GCC does not know how to recognize. If you want to pass an option that takes a separate argument, you must use -Xlinker twice, once for the option and once for the argument. For example, to pass -assert definitions, you must write `-Xlinker -assert -Xlinker definitions'. It does not work to write -Xlinker "-assert definitions", because this passes the entire string as a single argument, which is not what the linker expects. When using the GNU linker, it is usually more convenient to pass arguments to linker options using the option=value syntax than as separate arguments. For example, you can specify `-Xlinker -Map=output.map' rather than `-Xlinker -Map -Xlinker output.map'. Other linkers may not support this syntax for command-line options.
-Wl,option- Pass option as an option to the linker. If option contains commas, it is split into multiple options at the commas. You can use this syntax to pass an argument to the option. For example, `-Wl,-Map,output.map' passes `-Map output.map' to the linker. When using the GNU linker, you can also get the same effect with `-Wl,-Map=output.map'.
-usymbol- Pretend the symbol symbol is undefined, to force linking of library modules to define it. You can use -u multiple times with different symbols to force loading of additional library modules.
Footnotes
[1] On some systems, `gcc -shared' needs to build supplementary stub code for constructors to work. On multi-libbed systems, `gcc -shared' must select the correct support libraries to link against. Failing to supply the correct flags may lead to subtle defects. Supplying them in cases where they are not necessary is innocuous.
沒有留言:
張貼留言